DS 95



DAYLIFF DS submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.

MOTOR
The pump is coupled to a sealed liquid cooled 2-pole asynchronous squirrel cage motor constructed from stainless steel. The motor requires a remote starter and if unstable supply voltage is likely, an additional quick tripping control relay is recommended. Note that due to low starting torques of submersible motors, it is recommended that DOL starters are used.

Enclosure Class: IP68
Insulation Class: F
Voltage: 3x415V
Speed: 2900rpm

OPERATING CONDITIONS
Pumped Liquid: Thin, clean chemically non-aggressive liquids without solid particles or fibres.
Max. Liquid Temperature: DS wet end-50°C
Max. Water Depth: 30m
Min. Borehole Diameter: 200mm - 6" motor, 254mm - 8" motor

PUMP DATA

Model Motor Size ('') Motor Full Load Current (A) Istart/I Dimensions (mm) Weight (kg)
kW HP A B C E*
DS 95-2 6 9.2 13 21.8 4.6 1631 867 746

178

84
DS 95-4 18.5 25 42 5.5 2060 1057 1003 115
DS 95-6 8 26 35 57 4.9 2416 1157 1259 177
DS 95-8 37 50 78.5 3.7 2827 1312 1515 206
DS 95-10 45 60 96.5 6 3053 1270 1783 200 234
DS 95-12 55 75 114 5.9 3389 1350 2039 258

E* = Maximum diameter of the pump inclusive of cable guard and motor

Choose Pump by Usage / Application

Find the BEST solution for your installation based on your select requirement.