SP3A

Inquire Downloads Spares Share

Facebook Twitter WhatsApp Email

GRUNDFOS SP submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.

Standard pumps are designed for the pumping of non-aggressive water. 'N and R' versions are available for applications requiring a higher degree of corrosion resistance.

All SP pumps carry a drinking water approval and meet European Minimum Efficiency Index guidelines

Motor
The pump is coupled to a sealed, liquid cooled 2-pole asynchronous squirrel-cage GRUNDFOS motor constructed of stainless steel. Single phase motors are supplied complete with purpose designed control boxes, while three phase motors require a remote Direct-on-Line starter. If unstable supply voltage is likely an additional quick tripping control relay is recommended.

Enclosure Class: IP58
Insulation Class: B
Speed: 2900rpm

Operating Conditions

Pumped Liquid: Thin, clean, chemically non-aggressive liquids without solid
Max Liquid Temperature: +40°C
Max Water Depth: Up to 1.5kW 1ph and 2.2kW 3ph -150m, 2.2kW 1ph and 3 & 4 kW 3ph - 600m
Minimum Borehole Diameter: 110mm

PUMP DATA